STATIM Water Reservoir Filter

Update

Please be aware of the Statim water reservoir filter that will be included to all new Statim 2000(S)(E)(G4) and 5000(S)(G4) effective April 2006 as well as with all replacement filler cap spare part kits.

GET the Spare Parts Kit: Reservoir Cap / Water Reservoir Filter

This filter is available as a stand-alone spare part for regular maintenance.

Please note the filter will not work with old reservoir caps and therefore ordering a new reservoir cap is recommended to upgrade existing field units. All replacement caps will come with a new water reservoir filter.

  • The water reservoir filter will greatly reduce the occurrence of particles entering the water reservoir and help prolong the life of the internal components
  • Backward compatible with older units when a new cap is installed
  • Avoids splashing when pouring distilled water into the reservoir
  • The filter is easily removable for monthly cleaning or when required, due to a clogged filter, by placing the filter upside down below running water

SciCan strongly recommends the water reservoir filter become a part of all Statim maintenance and repairs.

How to replace/clean the Water Reservoir Filter

Repair Labor

SKU REPAIR
$400
We fix it for you 🔧🪛
Model number
Enter your text
Serial number
Enter your text
Issues Noted: Please list error codes and any parts or service work completed in the field below. Reason for repair ( Please provide specific detailed information **'Not working' and 'Defective' are NOT acceptable**)*
Enter your text
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Repair Labor
Product Details
Brand: SciCan

We will repair your STATIM or other SciCan equipment

For your SciCan product repair we will need the following details: your serial number which should be on the back of the unit, and a description of the issues noted such as cycle fault numbers, sounds or visible damage.

With this information we will provide you with a return authorization number and the best shipping address for where to send the equipment.

*The minimum estimate fee is $150 in case the estimate is refused and equipment is to be returned unrepaired or destroyed/recycled.


**ONE SERIAL NUMBER & PO PER REQUEST (PO NUMBER CANNOT BE DUPLICATED FOR MULTIPLE UNITS)

This Repair Form is for Equipment only – If you are sending in a Handpiece, please fill out the “Handpiece Repair Form".

Please note, the RA number must be on the outside of the box.

Any machines returned to SciCan without an RA number will be returned.


Shipping the Statim Unit

You must write your RMA number clearly on the outside of the package
Before you move the unit, you will need to drain the reservoir. To do so, follow these steps:
  1. Place a water container below the unit.
  2. Using the drain tube (see Section 3.5 Priming the Statim Pump, Figure 6 in the manual) empty the contents of the reservoir into the water container.
  3. Remove any remaining water from the reservoir with a non-linting, absorbent towel.
  4. Screw-in the three leveler feet found underneath the unit.
  5. Repack the unit in the original packing materials and include all accessories originally included with the unit.
  6. Specify heated and insured shipping.


Make sure to include ALL cassettes used with this unit. The cassettes must be shipped with the unit for calibration.
Note: Do not ship the unit with a cassette inserted.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.