Update
New production of Statim 5000 units and replacement seals will be changing this week followed by the Statim 2000 units and replacement seals within the next 3-4 months. The Statim 7000 units and seals should be changing by the end of the year. The dates may change depending on inventory levels at the SciCan warehouses.
Now SciCan quality is easier to recognize.
Leveler foot
Product Details
Brand: SciCan
Model: 2000, 5000, 7000, 900
Weight: 0.25 lbs
Replacement leveler foot for Statim autoclaves
Replacement leveler repair kit and foot
INSTRUCTION FOR LEVELER REPAIR
1. REMOVE BROKEN LEVELER INSERT
2 IF NECESSARY DEBURR EDGES FROM THE CHASSIS. THE LEVELER MOUNTING HOLE
3. MARK POSITION OF TWO 3/32 [2.5mm] HOLES FOR T-NUT REPAIR INSERT MOUNTING SCREWS (HOLES ARE 600 15.25mm APART). FOR MARKING USE T-NUT AS A TEMPLATE.
4 INSTALL T-NUT REPAIR INSERT FROM THE BOTTOM OF THE CHASSIS AND SECURE WITH TWO INCLUDED SCREWS WITH LOCKWASHERS AND NUTS INCLUDED M2.3 USE OF LM113 LOCTITE (OR EQUIVALENT) IS HIGHLY RECOMMENDED.
5 IN CASE OF REPLACING LEVELER INSERT HIDDEN UNDER THE ARMATURE, FIRST REMOVE THE ARMATURE FROM THE CHASSIS, THEN INSTALL T-NUT REPAIR INSERT.
6. IN THE CASE THAT THE OLD HOLE CAN NOT BE REUSED, THE T-NUT REPAIR INSERT CAN BE INSTALLED IN ANY PLACE. BUT MAINTAIN CLOSE PROXIMITY TO THE OLD LOCATION. IN THIS CASE DRILL ADDITIONAL 5/16' (8mm) CENTER HOLE TO ACCOMMODATTE T-NUT INSERT BARREL.
96-104133 Rev. 1.0
Latest generation!
Statim 2000 G4
List price $7,675.47
Save $985.47
$6,690
Statim 2000 G4
Latest revision STATIM 2000 G4 for Piercers with new touchscreen, PC board, and probe bracket with recessed thermocouple
On Sale
Statim 5000 G4
List price $8,663.20
Save $1,283.20
$7,380
Statim 5000 G4
Larger volume for wrapped loads, same Statim technology!