Helpful technical information about the STATIM G4+ LCD controller board
Technical Service Bulletin
22-TSB-424-EN Rev 2.0
Models and Markets: All STATIM G4 2000 and 5000 units worldwide excluding China.
Revision 2.0 release: 09/30/2024
Original release: 07-25-2022
Rev 2.0 change: On page 7 instructions on replacing a 3rd Generation (G4+) LCD board
have been updated with current information on SOM controller.
Description: Implementation of the new G4+ LCD Controller board for STATIM® G4 2000 and 5000.
Summary: Due to the current global electronic component shortages, the LCD Controller
board currently used in STATIM G4 units will be replaced by the 3rd generation LCD Controller
board (G4+ board). Technicians should know that there are now three different LCD
controller board types.
- Replace a 3rd Generation (G4+) LCD board with a 3rd Generation (G4+) LCD board.
- Replacement 2nd Generation (Next Gen) LCD boards continue to be available. Use 2nd
Generation (Next Gen) LCD boards to replace 2nd Generation (Next Gen) LCD boards. - Replacement 1st Generation (Old Gen) LCD boards are no longer available. Replace 1st
Generation board using a complete cover assembly that includes a 2nd Generation
(Next Gen) LCD board.
Action Required: This information is provided to help reduce confusion and increase
technician efficiency when ordering and replacing LCD controller boards.
The following are addressed in this Technical Service Bulletin:
- Identifying LCD controller boards
- What models are affected?
- Determining the spare parts you will need
- Replacing an LCD controller board
Anodization
#AnodizingIsAwesome All your anodization needs for jewelry
