STATIM Water Reservoir Filter

Update

Please be aware of the Statim water reservoir filter that will be included to all new Statim 2000(S)(E)(G4) and 5000(S)(G4) effective April 2006 as well as with all replacement filler cap spare part kits.

GET the Spare Parts Kit: Reservoir Cap / Water Reservoir Filter

This filter is available as a stand-alone spare part for regular maintenance.

Please note the filter will not work with old reservoir caps and therefore ordering a new reservoir cap is recommended to upgrade existing field units. All replacement caps will come with a new water reservoir filter.

  • The water reservoir filter will greatly reduce the occurrence of particles entering the water reservoir and help prolong the life of the internal components
  • Backward compatible with older units when a new cap is installed
  • Avoids splashing when pouring distilled water into the reservoir
  • The filter is easily removable for monthly cleaning or when required, due to a clogged filter, by placing the filter upside down below running water

SciCan strongly recommends the water reservoir filter become a part of all Statim maintenance and repairs.

How to replace/clean the Water Reservoir Filter

Water Filter In-Line Kit

SKU 01-106637S
$24.30
In stock
1
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Have questions?
Share this product with your friends
Water Filter In-Line Kit
Product Details
Brand: SciCan
Model: 2000, 5000, 7000, 900
Weight: 0.01 lbs

Statim Water Pump Filters removed and inline filter added

Effective June 2007 SciCan removed the two filters located on each end of the water pump due to the implementation of the water reservoir filter in early 2006. In the past, when the water reservoir filter was not present, debris and dust that entered the reservoir had a chance of getting into the water pump. The two filters in the water pump fittings were required to catch this debris.

Since the water reservoir filter has been implemented in early 2006 (refer to 05-TSB-204), SciCan has decided to remove these unnecessary filters in the water pump and discontinue the replacement parts for these filters, 01-104501S (Filters Pump A/B/C/D), as they are no longer required once the water reservoir filter is installed.

Removal of these filters does not affect the operation of the Statim units in any way.

Water pump maintenance

1. Ensure a water reservoir filter is installed

a. New reservoir filter and reservoir cap (01-101783S)

b. Replacement reservoir filter (01-109300S)

2. Inspect and clean the water pump filters, if the machine is equipped with them

A replacement elbow fitting without an outlet filter is available as part # 01-111115S if the filtered fitting (shown above) becomes damaged beyond use.

Addition of In-line filter

In December 2007 an in-line filter was added between the water reservoir and the water pump inlet to address the issue of customers not using the reservoir filter. The purpose of this in-line filter is to stop debris from entering the Statim plumbing system when the reservoir filter is not used.

The in-line filter kit is available as part # 01-106637S and includes the filter and all necessary tubing. This filter should be replaced every 2000 cycles or every two years.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.