Update
Please be aware of the Statim water reservoir filter that will be included to all new Statim 2000(S)(E)(G4) and 5000(S)(G4) effective April 2006 as well as with all replacement filler cap spare part kits.
GET the Spare Parts Kit: Reservoir Cap / Water Reservoir Filter
This filter is available as a stand-alone spare part for regular maintenance.
Please note the filter will not work with old reservoir caps and therefore ordering a new reservoir cap is recommended to upgrade existing field units. All replacement caps will come with a new water reservoir filter.
- The water reservoir filter will greatly reduce the occurrence of particles entering the water reservoir and help prolong the life of the internal components
- Backward compatible with older units when a new cap is installed
- Avoids splashing when pouring distilled water into the reservoir
- The filter is easily removable for monthly cleaning or when required, due to a clogged filter, by placing the filter upside down below running water
SciCan strongly recommends the water reservoir filter become a part of all Statim maintenance and repairs.
How to replace/clean the Water Reservoir Filter
VistaPure AutoFill
VistaPure AutoFill
VistaPure’s patented AutoFill accessories replenish SciCan STATIM®and BRAVO™ autoclaves with distilled-quality water automatically — enabling truly hands-free convenience.
VistaPure AutoFill accessory kits work with all VistaPure systems and can be installed easily on any STATIM 2000/G4 or STATIM 5000/G4, or any BRAVO autoclave, in just a few minutes!
- No more purchasing and storing distilled water
- No more cycle-fault errors caused by forgetting to fill reservoirs
- No more spills while filling autoclaves manually
- No more staff time spent filling autoclaves = more time with patients
VistaPure AutoFill Installation
A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.
Installing AutoFill on a STATIM
The VistaPure AutoFill for STATIM device (S3020) can be installed on any STATIM 2000/G4 or STATIM 5000/G4 autoclave as follows:
https://www.scican.com/us/media/water-management/SD-491_US_EN%20R1_Autofill_Sell%20Sheet_20160805_PRNT.pdfInstalling AutoFill on a BRAVO
The VistaPure AutoFill for BRAVO device (S3030) can be installed on any model BRAVO autoclave.
In order to connect the VistaPure AutoFill to the BRAVO, one of the two tanks that come with the BRAVO must be selected as a “relay tank” since the BRAVO system uses a suction-lift pump to fill its reservoir when in its automatic-filling mode. Note that the relay tank must be located within 6 feet of the BRAVO unit, due to the suction-lift capacity of the BRAVO pump.
