We are proud to announce the launch of SciCan OPTIM OS1 Liquid to round out our new line of OPTIM OS1 broad-spectrum, hospital-grade cleaner-disinfectant products.
OPTIM OS1 is a one-step, cleaner-disinfectant that removes soil and hard-to-kill organisms from clinical contact surfaces. It’s proprietary LAS Active System formulation kills bacteria, viruses, TB bacteria, and emerging pathogens in just 1 minute.
Rapid contact times for best results
- 60-second kill times for viruses, bacteria, and yeast
- Kills TB Bacteria in only 45 seconds and Candida auris in 60 seconds
Safe for use on hard, non-porous clinical surfaces
- Cleans and disinfects stainless steel, anodized aluminum, non-porous upholstery, Corian countertops, silicone, and more
Formulated with the user in mind
- VOC-free, fragrance-free and dye-free
Emerging Pathogen Claim ensures your clinic is ready for the next viral
threat
- Qualifies for EPA’s Emerging Viral Pathogen Claim
- Kills SARS-CoV-2, the virus that causes COVID-19, in only 30 seconds
You can learn more about OPTIM’s newest formula below
OPTIM OS1 Wipes Quick Reference Guide
Consult the product label before using this surface disinfectant.
OPTIM OS1 SOLUTION Liquid Spray
Spray Ready-to-Use OPTIM OS1 liquid onto a SciCan Dry Towelette. Do not directly spray onto the surface.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one
towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
OPTIM OS1 Ready-to-Use Wipes
Pull out OPTIM OS1 towelette at a 45 degree angle. Close lid.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
IMPORTANT !
DO NOT allow OPTIM OS1 to pool on surfaces.
Use of gauze dipped in solutions for wiping may cause pooling and should be wiped dry.
FOR BEST RESULTS:
- Do not over apply OPTIM OS1
- Use of OPTIM OS1 on brass, copper, and clear acrylic could discolor or damage surfaces, if not used as directed and over applied.
- Dental Association guidelines recommend the use of utility gloves when cleaning and disinfecting surfaces.
PLEASE REFER TO THE ORIGINAL CONTAINER FOR COMPLETE DIRECTIONS AND ADDITIONAL INFORMATION.
Procedure for disinfecting PVS elastomeric impression materials with OPTIM OS1
- Once the impression is taken, rinse it well under running tap water to remove blood and saliva.
- After rinsing, gently shake the impression within the sink basin to remove any adherent water with minimal splatter.
- Spray the entire impression with OPTIM OS1. Use the contact times as stated on the label.
- Rinse the impression thoroughly with tap water to remove any excess disinfectant. After a thorough rinse, gently
shake the impression inside the sink basin to remove any adherent water with minimal splatter. - Once dry, place the disinfected impression in a sealed bag.
The impression is now safe and ready for further processing.
Switching to OPTIM OS1
- Give all surfaces a good cleaning with soap and water before switching to OPTIM OS1.
- After switching to OPTIM OS1, surfaces should to be periodically rinsed with water (recommended no less than once per week).
- Common practice for all chemical disinfectants is to periodically rinse and dry surfaces to maintain the surface integrity.
- Avoid mixing of chemistries.
A CLEAN
START
Better surface cleaning for better disinfection
Get OPTIM OS1 on the job
Only a clean surface can be disinfected. OPTIM OS1 is a one-step, cleaner-disinfectant that removes soil and hard-to-kill organisms. Its LAS Active System enhances the powerful cleaning action of its surfactant base with a proprietary formulation that also kills bacteria, viruses, TB bacteria, and emerging pathogens in just 1 minute.
Only a clean surface can be disinfected. OPTIM OS1 is a one-step, cleaner-disinfectant that removes soil and hard-to-kill organisms. Its LAS Active System enhances the powerful cleaning action of its surfactant base with a proprietary formulation that also kills bacteria, viruses, TB bacteria, and emerging pathogens in just 1 minute.
Rapid contact times for best results
› 60-second kill times for hardest-to-kill viruses and bacteria
› Kills TB Bacteria in 45 seconds; fungi and yeast, including Candida auris, in 75 seconds
Emerging Pathogen Claim ensures your clinic is ready for the next viral threat
› Qualifies for EPA’s Emerging Viral Pathogen Claim
› OPTIM OS1 kills SARS-CoV-2, the virus that causes COVID-19, in only 30 seconds
Safe for use on hard, non-porous clinical surfaces
› Cleans and disinfects stainless steel, anodized aluminum, dental chair upholstery, Corian countertops, silicone, and more
Formulated with the user in mind
› VOC-free, fragrance-free and dye-free
Excellent wettability and durable wipe design reduce costs
› High wettability covers a larger surface area and will not dry before the contact time
1-Minute Kill Times
60-second kill times for 40+ organisms.
1-Step
Cleans and disinfects in one step for fast turnaround.
High Compatibility
Tested on hard, non-porous surfaces.
Excellent Wettability
Won’t dry up before the contact time.
Safe for use on hard, non-porous clinical surfaces
OPTIM OS1 is safe to use on upholstery, plastics, elastomers and metals. It’s formulated with the LAS Active System, an ingredient used for 40+ years in the food and service industries. OPTIM OS1 seamlessly cleans and disinfects stainless steel, anodized aluminum, Corian countertops, silicone, and other hard, non-porous materials common in dental offices.
Count on the latest OPTIM over-achiever
For 20+ years, OPTIM products have protected dental clinics from difficult-to-kill pathogens. Our newest one-step cleaner-disinfectant uses a proprietary formulation that is gentle on surfaces and tough on pathogens.
Rapid contact times for best results
A broad-spectrum, hospital-grade cleaner-disinfectant. 60-second kill times for the hardest-to-kill viruses, bacteria, and yeast, 45 seconds for TB Bacteria, 75 seconds for fungi and Candida auris.
Durable design reduces cost
OPTIM OS1 Wipes are made of a durable, non-woven construction. Their waffle pattern ensures liquid is deposited on the surface instead of staying inside the wipe. Strong wipes, with high wettability, can each cover a larger surface area than fast-drying competitor
Emerging Pathogen Claim ensures your clinic is ready for the next viral threat
OPTIM OS1 qualifies for EPA’s Emerging Viral Pathogen Claim. It penetrates bacterial cell membranes, helping ensure thorough disinfection. OPTIM OS1 kills SARS-CoV-2, the virus that causes COVID-19, in only 30 seconds.
Formulated with the user in mind
OPTIM OS1 is fragrance-free, dye-free, and does not emit any VOCs. The LAS Active System has undergone thorough safety reviews recognized by Health Canada, the FDA and EPA.
Surface Disinfectant Contact Time*
*Contact time in minutes. If blank, no published information was available. Information was obtained from publicly available material in September 2024. Information will be updated if there are changes in claims.
Download
Save with OPTIM OS1 | United States
Save Money
Offices using Quats-alcohol-based wipes that switch to OPTIM OS1 can save over $2,000 per year on average.
Shorten Turn Over Time
A hospital-grade cleaner-disinfectant with 60-second kill times for the toughest viruses, bacteria, and yeast, and 45 seconds for TB.
Reduce Wipe Waste
Wipe down the same surface area that would take two competitor wipes to complete effectively.
