We are proud to announce the launch of SciCan OPTIM OS1 Liquid to round out our new line of OPTIM OS1 broad-spectrum, hospital-grade cleaner-disinfectant products.
OPTIM OS1 is a one-step, cleaner-disinfectant that removes soil and hard-to-kill organisms from clinical contact surfaces. It’s proprietary LAS Active System formulation kills bacteria, viruses, TB bacteria, and emerging pathogens in just 1 minute.
Rapid contact times for best results
- 60-second kill times for viruses, bacteria, and yeast
- Kills TB Bacteria in only 45 seconds and Candida auris in 60 seconds
Safe for use on hard, non-porous clinical surfaces
- Cleans and disinfects stainless steel, anodized aluminum, non-porous upholstery, Corian countertops, silicone, and more
Formulated with the user in mind
- VOC-free, fragrance-free and dye-free
Emerging Pathogen Claim ensures your clinic is ready for the next viral
threat
- Qualifies for EPA’s Emerging Viral Pathogen Claim
- Kills SARS-CoV-2, the virus that causes COVID-19, in only 30 seconds
You can learn more about OPTIM’s newest formula below
OPTIM OS1 Wipes Quick Reference Guide
Consult the product label before using this surface disinfectant.
OPTIM OS1 SOLUTION Liquid Spray
Spray Ready-to-Use OPTIM OS1 liquid onto a SciCan Dry Towelette. Do not directly spray onto the surface.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one
towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
OPTIM OS1 Ready-to-Use Wipes
Pull out OPTIM OS1 towelette at a 45 degree angle. Close lid.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
IMPORTANT !
DO NOT allow OPTIM OS1 to pool on surfaces.
Use of gauze dipped in solutions for wiping may cause pooling and should be wiped dry.
FOR BEST RESULTS:
- Do not over apply OPTIM OS1
- Use of OPTIM OS1 on brass, copper, and clear acrylic could discolor or damage surfaces, if not used as directed and over applied.
- Dental Association guidelines recommend the use of utility gloves when cleaning and disinfecting surfaces.
PLEASE REFER TO THE ORIGINAL CONTAINER FOR COMPLETE DIRECTIONS AND ADDITIONAL INFORMATION.
Procedure for disinfecting PVS elastomeric impression materials with OPTIM OS1
- Once the impression is taken, rinse it well under running tap water to remove blood and saliva.
- After rinsing, gently shake the impression within the sink basin to remove any adherent water with minimal splatter.
- Spray the entire impression with OPTIM OS1. Use the contact times as stated on the label.
- Rinse the impression thoroughly with tap water to remove any excess disinfectant. After a thorough rinse, gently
shake the impression inside the sink basin to remove any adherent water with minimal splatter. - Once dry, place the disinfected impression in a sealed bag.
The impression is now safe and ready for further processing.
Switching to OPTIM OS1
- Give all surfaces a good cleaning with soap and water before switching to OPTIM OS1.
- After switching to OPTIM OS1, surfaces should to be periodically rinsed with water (recommended no less than once per week).
- Common practice for all chemical disinfectants is to periodically rinse and dry surfaces to maintain the surface integrity.
- Avoid mixing of chemistries.
Ergo UPS-FS-32 all-in-ONE™ UPS easy FOAM-it™ (32oz. Applicator Bottles)
✅(Refills available below)
all-in-ONE™
Surgical Instrument Cleaners and Conditioners
Highly concentrated for fast and effective cleaning.
Imagine: all-in-ONE™ Surgical Instrument Cleaners and Conditioners replacing multiple products, lowering costs, and improving the performance of surgical instruments.
The easy FOAM-it™ Surgical Instrument Pre wash Cleaner delivers a thick layer of long lasting foam cleaners and conditioners to speed the cleaning process. The easy FOAM-it Prewash and Cleaner rapidly breaks down all form of proteinaceous bioburden, cleans the surface and then rinses clean, rendering a residue free surface. When water is added or the instrument is placed into a wash basin, the foam dissipates to present a clear working surface, and no other cleaning products are needed. The easy-FOAM-it is highly concentrated to deliver all you need in ONE application.
In ONE application the easy FOAM-it can replace:
- enzyme cleaners,
- surgical instrument cleaning detergents,
- STAIN removers,
- surface conditioners, and
- surgical instrument lubricants
For the surgical instrument cleaning process to be thorough, four surgical instrument cleaner enzymes are needed:
- Lipase Surgical Instrument Cleaner Enzymes: for fat
- Amylase Surgical Instrument Cleaner Enzymes: for starch
- Carbohydrase Surgical Instrument Cleaner Enzymes: for high starches
- Protease Surgical Instrument Cleaner Enzymes: for blood
Four enzymes are necessary to breakdown bioburden on soiled surgical instruments. Surgical instrument cleaners that do not contain these four enzymes cannot remove all forms of proteinaceous bioburden. The only other product that delivers these 4 enzymes is RUHOF within their higher tier products.
The easy FOAM-it™ lays down a thick blanket to hydrate and remove proteinaceous debris, hard water deposits, and encrusted stains, for fast acting enzyme detergent cleaning action. When water is added the ‘foam’ dissipates to provide a clear ‘free-rinsing’ cleaning and conditioning solution.
- The all-in-ONE™ Cleaners and Conditioners deliver a unique formulation of detergents and multi-tiered "high-level" enzymes (Protease, Amylase, Lipase, and Carbohydrase) within a Neutral pH surfactant chemical complex.
- The all-in-ONE™ rapidly breaks down and removes all forms of proteinaceous bioburden, cleans and conditions the surface, enhances the “passive layer” protection of surgical stainless steel, lubricates moving parts, and then rinses clean.
- The highly concentrated all-in-ONE™ cleaners are aggressive against your most difficult cleaning challenge and guaranteed to be safe for all types of metal, rigid and flexible scopes, lenses, microsurgical instrumentation and reprocessing equipment.
- The all-in-ONE™ highly concentrated Surgical Instrument Cleaners and Conditioners will deliver 512 to 256 gallons (1938 to 969 liters) of Surgical Instrument Cleaning and Conditioning power.
- 🧪The Dilution rate is .25 to .5 ounces per gallon (1.92 ml per liter to 3.85 ml per liter) depending on level of bioburden, encrustation and stains.
Enzyme Surgical Instrument Detergent Optimal Temperatures:
🌡️The optimal temperature for maximum enzymatic enzyme detergent cleaning performance peaks at 137 degrees Fahrenheit (137 degree Fahrenheit ≈ 58.33 degree Celsius). The cleaning activity of the enzyme detergents at temperatures below and above this point is less but does offer cleaning value. The cleaning activity of the enzyme detergents does not stop at this temperature but is does lessen as the temperature increases.
all-in-ONE™ Surgical Instrument Cleaners and Conditioners
- ONE product for cleaning and conditioning Surgical Instruments.
- ONE application to thoroughly clean and condition Surgical Instruments.
- Apply it ONCE...
- It's all you really need for cleaning and conditioning Surgical Instruments and Scopes.
Replace Cleaning and Conditioning products for:
- removing all forms of bioburden,
- pre-cleaning and soaking to remove stains,
- manual cleaning,
- Ultrasonic cleaning, and
- Washer Decontaminator Disinfector reprocessing.
Your cleaner instruments will look newer and perform longer.
all-in-ONE™ Surgical Instrument Cleaning and Conditioning liquid available now as:
- easy FOAM-it™ 32 ounce applicator bottle [12 bottles per case]
- gallons [4 per case] with 0.25oz dispenser pump
- 2.5 gallon dispenser container [2 per case]
- 5 gallon dispenser container
- 15 gallon dispenser container
- 30 gallon dispenser container
- 55 gallon drum
