The Environmentally Friendly ‘Superbug’ Killer

Optim 33TB one step cleaner disinfectant

SciCan_OPTIM_banner-1Optim 33TB
OptIM disinfectant cleanerIt has long been known that hydrogen peroxide can kill germs without being harmful to users. However, up to now, this remarkable chemical had not been considered stable enough to be practical as the foundation for a system of commercial disinfectant cleaners.

Scientists at Virox Technologies Inc. have now developed a way to put this world’s oldest known antimicrobial to work. Patented accelerated hydrogen peroxide (AHP) is a stable cleaning and disinfecting solution with enhanced germicidal activity that is not harmful to those who use it, or to the environment.

Now available from SciCan Inc. in the U.S.A. through STATIM.US, OPTIM 33 TB with AHP chemistry is the first real breakthrough in chemical germicides in over 25 years. It is not a mere substitute for current surface disinfection technologies, but a truly new technology with demonstrable superiority in a number of key areas:

1. Contact times

  • 1 minute Bactericidal (including MRSA ‘Superbug’, E. Coli and VRE)
  • 1 minute Virucidal (including HIV, Hepatitis C, Hepatitis B, Influenza A and Polio)
  • 5 minutes Tuberculocidal

2. Cleaning efficacy – one-step cleaning and disinfecting ability

3. User Safety – OPTIM 33TB carries no warning labels

4. Environmental Impact – hydrogen peroxide breaks down into water and oxygen

Many chemical disinfectant manufacturers try to strike the difficult balance between the safety and the efficacy of their products. It is easy to create a disinfectant that will kill pathogens, however, that disinfectant may be harmful to users and may not be environmentally responsible.

With OPTIM 33TB, there is no longer a need to compromise on efficacy (contact times), personal safety or environmental integrity.

AHP is a synergistic blend of commonly used ‘safe’ ingredients that when combined with low levels of hydrogen peroxide dramatically increases its germicidal potency and cleaning performance. AHP contains only those ingredients listed on the U.S.A EPA inerts listing and the FDA GRAS (Generally Regarded As Safe) listing which contribute to unsurpassed health, safety and environmental sustainability. OPTIM 33TB carries no warning labels.

The benefits and efficacy of AHP have been validated by third party clinical studies conducted by scientific organizations and third party researchers that are recognized by government regulatory agencies in the United States, Canada and other countries around the world.

The applications for AHP are numerous. Widely used in medical offices, it is also commonly used in hospitals, long term care facilities, daycare centers, and other environments.

For an uncompromisingly high standard of infection control, turn to OPTIM 33TB to quickly and safely clean and disinfect.


VistaPure Replacement Filter Pack

R3250
$567
In stock
1
Product Details
Brand: SciCan
Model: Statim, StatClave, Bravo, Hydrim C, Hydrim L

Filters for your Steri-Center’s best friend.

VistaPure™ provides two grades of high-quality water for autoclaves, dental bottles, ultrasonic cleaners and instrument washers for the ultimate convenience.


VistaPure filter replacement schedule details

It is not typically necessary to change all the filters at the same time. The pre-filter and polishing filter should be changed at least once per year and the deionization and hyper filtration filters changed only as needed as indicated by TDS tests.
Here are some basic guidelines: pre-filter and polishing filter elements should be changed annually in relatively rare instances of source water with unusually high levels of sediment or debris such as areas surrounded by heavy construction. The pre filter element may need to be changed more frequently due to premature plugging of the filter.
The ionization filters typically last anywhere from four months to three years depending on the volume of usage and the quality of the local water supply. Both the ionization filters should be changed whenever the system mounted TDS meter in the "out" position displays a number equal to or greater than four parts per million. It's important never to fill an autoclave with water with greater than five parts per million TDS.
VistaPure's hyper filtration element typically only needs to be replaced every three to five years depending on the volume of usage and the quality and pressure of the local water supply. Replace the hyper filtration element whenever the system mounted TDS meter in the "in" position exceeds 10% of the TDS of the municipal water supply feeding the system as measured with the included handheld meter checking water quality with the provided TDS meters monthly will help you keep ahead of required filter changes.
Please note that water should be running through the system when checking water quality using the system mounted TDS meter, simply run the Vista peer faucet for a few moments in the system will start to produce water and yield accurate results. Also please note that all filters are not created equal using inferior knockoff filter elements or following protocols different from those specified by the manufacturer may result in less than desirable outcomes and inhibits our ability to provide customer service and warranty support for the system.

How to Change VistaPure Filters

The Prefilter & Polishing filter should be changed at least once per year, and the Deionization and Hyperfiltration filters only need to be changed on an as-needed basis.


Save this product for later

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.