The Environmentally Friendly ‘Superbug’ Killer

Optim 33TB one step cleaner disinfectant

SciCan_OPTIM_banner-1Optim 33TB
OptIM disinfectant cleanerIt has long been known that hydrogen peroxide can kill germs without being harmful to users. However, up to now, this remarkable chemical had not been considered stable enough to be practical as the foundation for a system of commercial disinfectant cleaners.

Scientists at Virox Technologies Inc. have now developed a way to put this world’s oldest known antimicrobial to work. Patented accelerated hydrogen peroxide (AHP) is a stable cleaning and disinfecting solution with enhanced germicidal activity that is not harmful to those who use it, or to the environment.

Now available from SciCan Inc. in the U.S.A. through STATIM.US, OPTIM 33 TB with AHP chemistry is the first real breakthrough in chemical germicides in over 25 years. It is not a mere substitute for current surface disinfection technologies, but a truly new technology with demonstrable superiority in a number of key areas:

1. Contact times

  • 1 minute Bactericidal (including MRSA ‘Superbug’, E. Coli and VRE)
  • 1 minute Virucidal (including HIV, Hepatitis C, Hepatitis B, Influenza A and Polio)
  • 5 minutes Tuberculocidal

2. Cleaning efficacy – one-step cleaning and disinfecting ability

3. User Safety – OPTIM 33TB carries no warning labels

4. Environmental Impact – hydrogen peroxide breaks down into water and oxygen

Many chemical disinfectant manufacturers try to strike the difficult balance between the safety and the efficacy of their products. It is easy to create a disinfectant that will kill pathogens, however, that disinfectant may be harmful to users and may not be environmentally responsible.

With OPTIM 33TB, there is no longer a need to compromise on efficacy (contact times), personal safety or environmental integrity.

AHP is a synergistic blend of commonly used ‘safe’ ingredients that when combined with low levels of hydrogen peroxide dramatically increases its germicidal potency and cleaning performance. AHP contains only those ingredients listed on the U.S.A EPA inerts listing and the FDA GRAS (Generally Regarded As Safe) listing which contribute to unsurpassed health, safety and environmental sustainability. OPTIM 33TB carries no warning labels.

The benefits and efficacy of AHP have been validated by third party clinical studies conducted by scientific organizations and third party researchers that are recognized by government regulatory agencies in the United States, Canada and other countries around the world.

The applications for AHP are numerous. Widely used in medical offices, it is also commonly used in hospitals, long term care facilities, daycare centers, and other environments.

For an uncompromisingly high standard of infection control, turn to OPTIM 33TB to quickly and safely clean and disinfect.


VistaPure AutoFill

S3020
$208.05
In stock
1
Product Details
Brand: SciCan

VistaPure AutoFill

VistaPure’s patented AutoFill accessories replenish SciCan STATIM®and BRAVO™ autoclaves with distilled-quality water automatically — enabling truly hands-free convenience.

VistaPure AutoFill accessory kits work with all VistaPure systems and can be installed easily on any STATIM 2000/G4 or STATIM 5000/G4, or any BRAVO autoclave, in just a few minutes!

  • No more purchasing and storing distilled water
  • No more cycle-fault errors caused by forgetting to fill reservoirs
  • No more spills while filling autoclaves manually
  • No more staff time spent filling autoclaves = more time with patients

VistaPure AutoFill Installation

A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.

Installing AutoFill on a STATIM

The VistaPure AutoFill for STATIM device (S3020) can be installed on any STATIM 2000/G4 or STATIM 5000/G4 autoclave as follows:

https://www.scican.com/us/media/water-management/SD-491_US_EN%20R1_Autofill_Sell%20Sheet_20160805_PRNT.pdf

Installing AutoFill on a BRAVO

The VistaPure AutoFill for BRAVO device (S3030) can be installed on any model BRAVO autoclave.

In order to connect the VistaPure AutoFill to the BRAVO, one of the two tanks that come with the BRAVO must be selected as a “relay tank” since the BRAVO system uses a suction-lift pump to fill its reservoir when in its automatic-filling mode. Note that the relay tank must be located within 6 feet of the BRAVO unit, due to the suction-lift capacity of the BRAVO pump.


Connecting to a StatClave G4


Save this product for later

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.