The Environmentally Friendly ‘Superbug’ Killer

Optim 33TB one step cleaner disinfectant

SciCan_OPTIM_banner-1Optim 33TB
OptIM disinfectant cleanerIt has long been known that hydrogen peroxide can kill germs without being harmful to users. However, up to now, this remarkable chemical had not been considered stable enough to be practical as the foundation for a system of commercial disinfectant cleaners.

Scientists at Virox Technologies Inc. have now developed a way to put this world’s oldest known antimicrobial to work. Patented accelerated hydrogen peroxide (AHP) is a stable cleaning and disinfecting solution with enhanced germicidal activity that is not harmful to those who use it, or to the environment.

Now available from SciCan Inc. in the U.S.A. through STATIM.US, OPTIM 33 TB with AHP chemistry is the first real breakthrough in chemical germicides in over 25 years. It is not a mere substitute for current surface disinfection technologies, but a truly new technology with demonstrable superiority in a number of key areas:

1. Contact times

  • 1 minute Bactericidal (including MRSA ‘Superbug’, E. Coli and VRE)
  • 1 minute Virucidal (including HIV, Hepatitis C, Hepatitis B, Influenza A and Polio)
  • 5 minutes Tuberculocidal

2. Cleaning efficacy – one-step cleaning and disinfecting ability

3. User Safety – OPTIM 33TB carries no warning labels

4. Environmental Impact – hydrogen peroxide breaks down into water and oxygen

Many chemical disinfectant manufacturers try to strike the difficult balance between the safety and the efficacy of their products. It is easy to create a disinfectant that will kill pathogens, however, that disinfectant may be harmful to users and may not be environmentally responsible.

With OPTIM 33TB, there is no longer a need to compromise on efficacy (contact times), personal safety or environmental integrity.

AHP is a synergistic blend of commonly used ‘safe’ ingredients that when combined with low levels of hydrogen peroxide dramatically increases its germicidal potency and cleaning performance. AHP contains only those ingredients listed on the U.S.A EPA inerts listing and the FDA GRAS (Generally Regarded As Safe) listing which contribute to unsurpassed health, safety and environmental sustainability. OPTIM 33TB carries no warning labels.

The benefits and efficacy of AHP have been validated by third party clinical studies conducted by scientific organizations and third party researchers that are recognized by government regulatory agencies in the United States, Canada and other countries around the world.

The applications for AHP are numerous. Widely used in medical offices, it is also commonly used in hospitals, long term care facilities, daycare centers, and other environments.

For an uncompromisingly high standard of infection control, turn to OPTIM 33TB to quickly and safely clean and disinfect.


Anodic Marker

03-fm
$55
In stock
1
Product Details
Brand: Reactive Metals

Anodic Marker Lead

Now you can "write" or "draw" anodize with complete control of your electrolyte. The pump action marker makes it super easy.

Just fill the marker with electrolyte using the included dropper. Depress the tip to release the electrolyte. Too much? Dab on a paper towel. Too little? Depress again.

Use on niobium or titanium that has been clipped to your red (anode) lead.

Replacement 2mm tips available.
Ships with plastic dropper.

5" marker with a 28" cord.

Developed in partnership with Reactive Metals Studio Inc by John S. Miller.

2mm Anodic Marker Lead $39.95 each

2 pack replacement tip $6.48 each
Replacement Dropper $.60 each
Replacement Rubber Stopper $1.69 each

INSTRUCTIONS

  1. Remove the stopper from the end of the marker.
  2. Using the supplied dropper, fill marker with electrolyte.
  3. Replace stopper firmly using a twist motion.
  4. Plug lead into the black (cathode) jack on your anodizer.
  5. Holding upright, depress tip end of marker until it becomes wet with electrolyte. Avoid flooding the tip-if there is too much liquid just blot on a paper towel.

⚠️⚡It is not advisable to turn the voltage up high and touch your piece with the marker. This can damage your marker as well as your anodizer. Start low, keeping the tip saturated with electrolyte and turn up the voltage slowly.

⚠️⚡Do NOT let the tip dry out as burn marks can occur on the metal if tip is too dry. Tips can be removed and the alternate end used once first end has become worn.

⚠️⚡Do NOT pull the lead out of jack by the cord, hold on to the banana plug when removing. By using this item, you agree to assume all risks and responsibilities associated with its use.

Save this product for later

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.