We are proud to announce the launch of SciCan OPTIM OS1 Liquid to round out our new line of OPTIM OS1 broad-spectrum, hospital-grade cleaner-disinfectant products.
OPTIM OS1 is a one-step, cleaner-disinfectant that removes soil and hard-to-kill organisms from clinical contact surfaces. It’s proprietary LAS Active System formulation kills bacteria, viruses, TB bacteria, and emerging pathogens in just 1 minute.
Rapid contact times for best results
- 60-second kill times for viruses, bacteria, and yeast
- Kills TB Bacteria in only 45 seconds and Candida auris in 60 seconds
Safe for use on hard, non-porous clinical surfaces
- Cleans and disinfects stainless steel, anodized aluminum, non-porous upholstery, Corian countertops, silicone, and more
Formulated with the user in mind
- VOC-free, fragrance-free and dye-free
Emerging Pathogen Claim ensures your clinic is ready for the next viral
threat
- Qualifies for EPA’s Emerging Viral Pathogen Claim
- Kills SARS-CoV-2, the virus that causes COVID-19, in only 30 seconds
You can learn more about OPTIM’s newest formula below
OPTIM OS1 Wipes Quick Reference Guide
Consult the product label before using this surface disinfectant.
OPTIM OS1 SOLUTION Liquid Spray
Spray Ready-to-Use OPTIM OS1 liquid onto a SciCan Dry Towelette. Do not directly spray onto the surface.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one
towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
OPTIM OS1 Ready-to-Use Wipes
Pull out OPTIM OS1 towelette at a 45 degree angle. Close lid.
If surface is not heavily soiled, clean and disinfect surface with one wipe and allow surface to remain wet for the contact time indicated on the label.
If surface is visibly soiled, clean surface with one towelette and discard. Use a second towelette to disinfect and allow surface to remain wet for the contact time indicated on the label.
IMPORTANT !
DO NOT allow OPTIM OS1 to pool on surfaces.
Use of gauze dipped in solutions for wiping may cause pooling and should be wiped dry.
FOR BEST RESULTS:
- Do not over apply OPTIM OS1
- Use of OPTIM OS1 on brass, copper, and clear acrylic could discolor or damage surfaces, if not used as directed and over applied.
- Dental Association guidelines recommend the use of utility gloves when cleaning and disinfecting surfaces.
PLEASE REFER TO THE ORIGINAL CONTAINER FOR COMPLETE DIRECTIONS AND ADDITIONAL INFORMATION.
Procedure for disinfecting PVS elastomeric impression materials with OPTIM OS1
- Once the impression is taken, rinse it well under running tap water to remove blood and saliva.
- After rinsing, gently shake the impression within the sink basin to remove any adherent water with minimal splatter.
- Spray the entire impression with OPTIM OS1. Use the contact times as stated on the label.
- Rinse the impression thoroughly with tap water to remove any excess disinfectant. After a thorough rinse, gently
shake the impression inside the sink basin to remove any adherent water with minimal splatter. - Once dry, place the disinfected impression in a sealed bag.
The impression is now safe and ready for further processing.
Switching to OPTIM OS1
- Give all surfaces a good cleaning with soap and water before switching to OPTIM OS1.
- After switching to OPTIM OS1, surfaces should to be periodically rinsed with water (recommended no less than once per week).
- Common practice for all chemical disinfectants is to periodically rinse and dry surfaces to maintain the surface integrity.
- Avoid mixing of chemistries.
STATIM 5000 G4 autoclave
Fast, Gentle, Reliable, and Smart.
STATIM is the world’s fastest cassette autoclave from start to sterile, gentle on your instruments due to its state-of-the-art steam process and relied upon by the busiest of practices.
Drawing on decades of innovation, the leader in autoclave technology has created a complete line of STATIM Cassette Autoclaves – designed to meet the needs of every size of practice. The STATIM family comprises the fastest, most innovative cassette autoclaves available on the market today.
Expert advice for Piercing and Tattoo
Choosing the right STATIM autoclave for your studio ultimately comes down to a trade-off between speed and volume. While both the STATIM 2000 and the STATIM 5000 utilize the cutting-edge SciCan technology, they cater to different sterilization needs.
STATIM 2000: The Piercer's Choice for Speed
For the typical piercing studio that relies on "just-in-time" sterilization—the core advantage of the STATIM system—the STATIM 2000 is often the ideal machine. The 2000 is engineered for maximum speed, delivering a complete Unwrapped Hollow instrument cycle in approximately 6 minutes and 45 seconds (excluding drying). This rapid turnaround is essential for maintaining a continuous workflow and performing aseptic technique right in front of your client. Its smaller capacity, built for approximately 1 kg of instruments, is perfectly suited for sterilizing individual items like jewelry, needles, tapers, hemostats and clamps as needed throughout the day.
STATIM 5000: Power and Volume for High-Capacity Studios
The STATIM 5000, while still incredibly fast compared to conventional autoclaves, is slightly slower on its unwrapped cycle, taking approximately 9 minutes and 45 seconds (excluding drying). However, its larger cassette size makes it the superior choice for volume. With a maximum load of approximately 1.5 kg, the 5000 is better suited for:
- High-volume piercing studios with greater bulk sterilization needs.
- Combined studios that house both piercing and tattoo operations, requiring more capacity for wrapped instrument packs.
- If you already have a STATIM 2000, and want similar operation and maintenance for packages, and occasional unwrapped sterilization.
The Bottom Line: If your priority is the fastest possible on-demand sterilization for unwrapped instruments, which is the case for most dedicated piercing professionals, the STATIM 2000 is the recommended choice. If, however, you need the extra room for greater daily volume or frequently sterilize wrapped loads, the STATIM 5000 offers the necessary capacity.
Fast
STATIM provides sterilization and dryness at speeds faster than conventional chambered autoclaves.
- Using only a small amount of water for each cycle, the STATIM heats and converts to steam in mere seconds.
- The innovative design of STATIM’s fully removable chamber allows for quick heating and cooling.
- A complete solution: rapid sterilization with rapid drying via the STATIM Dri-Tec drying technology.
Smart
G4 Technology - information at your fingertips.
WiFi enabled G4 technology can connect and send cycle data to your smart devices or computer, allowing staff to focus on the most important thing in a dental practice, the patients.
Maintenance reminders, instructions and the option for automatic software updates keep your STATIM in good working order.
G4 technology connects your STATIM to specialized technicians, which allows for remote support and minimizes unnecessary downtime.
Reliable
For 30 years, STATIM’s speed, reliability and dependability have made it the ideal sterilizer for every practice.
Healthcare practitioners in over 90 countries around the world rely on STATIM to protect their patients and staff from infection.
The spirit of innovation that made STATIM an integral part of every Stericentre 30 years ago is still evident with the technological advancements like G4 technology that bring automation to the Stericentre.
Whether as a stand-alone product or in combination with the Bravo Chamber Sterilizer, dentists rely on STATIM for fast and efficient instrument turnaround.
This model has all the benefits of our Classic STATIM 5000 Cassette Autoclave
The STATIM 5000 "Classic" Cassette Autoclave has been superseded by the G4 model
- Ultra-fast 9 minute unwrapped cycle.
- 17.5 minute wrapped cycle
- Exceptional instrument turnover
- 15 minute Dri-TecR Drying Technology
- Reduced instrument investment
- Prolongs instrument life
Larger than the 2000, the Statim 5000 has an additional sterilization cycle and a roomier cassette designed to process bulkier instruments and greater loads. It's a reliable cassette sterilizer that's compact enough to fit in patient treatment areas and fast enough to sterilize expensive Lasik, PRK, endoscopic and cataract instruments, including phaco handpieces, between procedures - it can complete an unwrapped sterilization cycle in just nine minutes and a wrapped cycle in just 17.5 minutes.*
The Statim 5000 is fully automatic. Simply select one of four sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
SciCan's Statim cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States and Europe.
* Cycle times do not include drying.
STATIM FAQs: Click here
ACCESSORIES: Get STATIM Accessories here
SPECIFICATIONS:
| Unit Size : | L 555mm x W 415mm x H 190mm L 21.75" x W 16.25" x H 7.5" |
| Cassette Internal Dimensions : | L 380mm x W 180mm x H 75mm L 15" x W 7" x H 3" |
| Reservoir Capacity : | 4.0 litres (distilled water) |
| Weight without water : | 73lbs or 33kg |
| Power Consumption : | 110V, 60Hz, 11A |
Save up to 35% off the list price of a STATIM 2000 or STATIM 5000 cassette autoclave when you use your Section 179 tax deduction: Click here for more info
GET A QUOTE to finance your equipment
The use of STATIM sterilizers was introduced to the body art field in the early 1990's by Brian Skellie at Piercing Experience, and developed in community along with other practical innovations in applied safety precautions and techniques.
