OPTIM™33 TB Quick Reference Guide

SWITCHING TO OPTIM 33 TB

Give all surfaces a rinse with mild soap & water before switching to OPTIM.

QUATs (Quaternary Ammonium Compounds) or phenol based disinfectants are common active ingredients in the dental operatory today and are known to leave residual active chemistry on surfaces. AHP (Accelerated Hydrogen Peroxide) is an oxidizer and will remove chemical residues left by other surface disinfectants. There may be odor or film development if surfaces are not rinsed (damp wiped) properly with soap & water. This odor or film should however dissipate on average within 7 to 10 days of continual use as AHP will remove the residual active ingredient.

Surfaces need to be periodically rinsed with water!

Dissents or complaints happen when users are not informed on the correct protocol when using the product. It is good practice to periodically (at least once a week) rinse or wipe surfaces with a damp cloth to remove surfactants (detergents) or residual active ingredients that can build up over time with the use of ANY disinfectant cleaner.

No mixing of chemistries!

Mixing of chemistries in operatory i.e. using quats-alcohol/phenol disinfectant and OPTIM 33 TB in the same operatory or refilling OPTIM into chemical container used previously for other chemicals is not recommended. It is best practice to never mix chemistries (any kind) no matter what industry you are in.

On which surfaces can OPTIM 33 TB be used?

Non-porous hand contact environmental surfaces including Naugahyde (vinyl coated upholstery fabric).

NOTE: Soft surfaces such as chairs and cables should be periodically rinsed with water or wiped with a damp cloth to prevent the build-up of disinfectant or surfactants. As best practice, for any kind of disinfectant or cleaners used, chairs should be wiped with a damp cloth at the end of the day or at least once a week.

PRECAUTIONS:

– Surfaces that are composed of brass or copper, or other ferrous metals may show signs of discoloration or pitting with prolonged exposure.

– Anodized aluminum (often used on hand-pieces) and carbon tipped instruments should be avoided (i.e. burrs). Material impact can be reduced with rinsing or damp wiping.

We advise against wrapping gauze pad or ‘sleeves’ soaked in disinfectant on hand-pieces.

OPTIM 33 TB Solution

Spray – Wipe – Spray Protocol

Visibly Soiled Surface – Clean before disinfecting

1. Spray OPTIM 33 TB directly onto surface.
2. Wipe visible soil with Stat-Wipes or clean paper towel to clean surface.
3. Discard soiled towelette.
4. Continue to disinfection step

Visibly Clean Surface – Disinfect pre-clean surface

1. Spray OPTIM 33TB to cover the pre-clean surface. Allow the disinfectant to remain
2. undisturbed on the surface for the contact time indicated on the label.
3. *Do not overspray as this can create pooling of liquid. OPTIM 33TB is water based not alcohol based.
4. Wipe with Stat-Wipes or clean paper towel.
5. Discard used towelette.

*Using gauze dipped in solutions for wiping can cause pooling of liquid on surface. Wipe surface dry with paper towel if surface is still wet after desired contact time is achieved.

** OPTIM 33 TB has been tested in accordance with EPA organic soil load requirement as a One- Step Cleaner Disinfectant. Therefore, OPTIM can be used on visibly clean surface. Depending on the soil load on the surface, the 2 step process is not required due to this EPA claim.

OPTIM 33 TB Wipes

Standard Protocol for Visibly Soiled Surface

Clean before disinfecting

1. Pull out OPTIM 33 TB towelette from the canister.
2. Clean surface with towelette to remove organic matter or visible blood.
3. Discard used towellete.

Disinfect After Cleaning

1. Pull out OPTIM 33 TB towelette from the canister.
2. Disinfect surface with towelette.
3. Allow surface to remain wet for the recommended contact time.
4. Discard used towelette.

** OPTIM 33 TB has been tested in accordance with EPA organic soil load requirement as a One-Step Cleaner Disinfectant. Depending on the soil load on the surface, users have the choice of cleaning the surface with one side of the wipe and disinfecting the surface with the reverse side of the wipes. Always allow surface to remain wet for the recommended contact time.

Because OPTIM 33 TB is approved as a One-Step Cleaner Disinfectant, depending on the soil load, the 2 step process may not be required due to this EPA claim.

Get Optim in our Store

+3

all-in-ONE UPS Universal Processing Solution enzyme cleaner

Ergo UPS1-5

$146.82

Would you like to buy this product one time or subscribe for it?

Buy One Time

Subscribe

Pre-order

Quantity:

1

Pre-Order

Product Details

Brand: ERGO

Model: all-in-ONE UPS

Units in product: 4 gallons

Price per unit: 32.23500

(Refill for Ergo UPS-FS-32 all-in-ONE™ UPS easy FOAM-it™ enzyme cleaner foaming sprayer)

all-in-ONE™

Surgical Instrument Cleaners and Conditioners

Highly concentrated for fast and effective cleaning.

Imagine: all-in-ONE™ Surgical Instrument Cleaners and Conditioners replacing multiple products, lowering costs, and improving the performance of surgical instruments.

The easy FOAM-it™ Surgical Instrument Pre wash Cleaner delivers a thick layer of long lasting foam cleaners and conditioners to speed the cleaning process. The easy FOAM-it Prewash and Cleaner rapidly breaks down all form of proteinaceous bioburden, cleans the surface and then rinses clean, rendering a residue free surface. When water is added or the instrument is placed into a wash basin, the foam dissipates to present a clear working surface, and no other cleaning products are needed. The easy-FOAM-it is highly concentrated to deliver all you need in ONE application.

In ONE application the easy FOAM-it can replace:

• enzyme cleaners,
• surgical instrument cleaning detergents,
• STAIN removers,
• surface conditioners, and
• surgical instrument lubricants

For the surgical instrument cleaning process to be thorough, four surgical instrument cleaner enzymes are needed:

1. Lipase Surgical Instrument Cleaner Enzymes: for fat
2. Amylase Surgical Instrument Cleaner Enzymes: for starch
3. Carbohydrase Surgical Instrument Cleaner Enzymes: for high starches
4. Protease Surgical Instrument Cleaner Enzymes: for blood

Four enzymes are necessary to breakdown bioburden on soiled surgical instruments. Surgical instrument cleaners that do not contain these four enzymes cannot remove all forms of proteinaceous bioburden. The only other product that delivers these 4 enzymes is RUHOF within their higher tier products.

The easy FOAM-it™ lays down a thick blanket to hydrate and remove proteinaceous debris, hard water deposits, and encrusted stains, for fast acting enzyme detergent cleaning action. When water is added the ‘foam’ dissipates to provide a clear ‘free-rinsing’ cleaning and conditioning solution.

• The all-in-ONE™ Cleaners and Conditioners deliver a unique formulation of detergents and multi-tiered "high-level" enzymes (Protease, Amylase, Lipase, and Carbohydrase) within a Neutral pH surfactant chemical complex.
• The all-in-ONE™ rapidly breaks down and removes all forms of proteinaceous bioburden, cleans and conditions the surface, enhances the “passive layer” protection of surgical stainless steel, lubricates moving parts, and then rinses clean.
• The highly concentrated all-in-ONE™ cleaners are aggressive against your most difficult cleaning challenge and guaranteed to be safe for all types of metal, rigid and flexible scopes, lenses, microsurgical instrumentation and reprocessing equipment.
• The all-in-ONE™ highly concentrated Surgical Instrument Cleaners and Conditioners will deliver 512 to 256 gallons (1938 to 969 liters) of Surgical Instrument Cleaning and Conditioning power.
• The Dilution rate is .25 to .5 ounces per gallon (1.92 ml per liter to 3.85 ml per liter) depending on level of bioburden, encrustation and stains.

Enzyme Surgical Instrument Detergent Optimal Temperatures:

The optimal temperature for maximum enzymatic enzyme detergent cleaning performance peaks at 137 degrees Fahrenheit (137 degree Fahrenheit ≈ 58.33 degree Celsius). The cleaning activity of the enzyme detergents at temperatures below and above this point is less but does offer cleaning value. The cleaning activity of the enzyme detergents does not stop at this temperature but is does lessen as the temperature increases.

all-in-ONE™ Surgical Instrument Cleaners and Conditioners

• ONE product for cleaning and conditioning Surgical Instruments.
• ONE application to thoroughly clean and condition Surgical Instruments.
• Apply it ONCE...
• It's all you really need for cleaning and conditioning Surgical Instruments and Scopes.

Replace Cleaning and Conditioning products for:

• removing all forms of bioburden,
• pre-cleaning and soaking to remove stains,
• manual cleaning,
• Ultrasonic cleaning, and
• Washer Decontaminator Disinfector reprocessing.

Your cleaner instruments will look newer and perform longer.

all-in-ONE™ Surgical Instrument Cleaning and Conditioning liquid available now as:

• easy FOAM-it™ 32 ounce applicator bottle [12 bottles per case]
• gallons [4 per case] with 0.25oz dispenser pump
• 5 gallon dispenser container
• 15 gallon dispenser container
• 30 gallon dispenser container
• 55 gallon drum

Save this product for later

Favorite

• Search Products
• My Account
• Track Orders
• Favorites
• Shopping Bag

Display prices in: USD