Save with OPTIM OS1 | United States

save with optim os1

Stop throwing away money on wipes

Tell us about your studio and we’ll show you how much you can save.

OPTIM OS1

Here is a calculator for how much you can save with OPTIM OS1 wipes

Save Money

Save Money

Offices using Quats-alcohol-based wipes that switch to OPTIM OS1 can save over $2,000 per year on average.

Shorten Turn Over Time

Shorten Turn Over Time

A hospital-grade cleaner-disinfectant with 60-second kill times for the toughest viruses, bacteria, and yeast, and 45 seconds for TB.

Reduce Wipe Waste

Reduce Wipe Waste

Wipe down the same surface area that would take two competitor wipes to complete effectively.

How they tested it.

In a recent Dental Advisor study² on surface disinfectant wipes, OPTIM OS1 outperformed the other brands, including a leading quats-alcohol wipe. Not only did it remain effective for its full 1-minute contact time, but it also covered a much larger surface area than the competitor wipes.

To test the wipes, researchers used a 12.5-square-foot table divided into four sections. Each wipe was used to wipe down one quarter section. Researchers then waited for the kill time to elapse before moving to the next section with the same wipe. OPTIM OS1 was able to effectively clean and disinfect two times more surface area than the leading quats-alcohol-based wipe.

View Dental Advisor study below

Dental Study

VistaPure Replacement Filter Pack

SKU R3250
$580
Filters
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
VistaPure Replacement Filter Pack
Product Details
Brand: SciCan
Model: Statim, StatClave, Bravo, Hydrim C, Hydrim L
Weight: 5 lbs

Filters for your Steri-Center’s best friend.

VistaPure™ provides two grades of high-quality water for autoclaves, dental bottles, ultrasonic cleaners and instrument washers for the ultimate convenience.


VistaPure filter replacement schedule details

It is not typically necessary to change all the filters at the same time. The pre-filter and polishing filter should be changed at least once per year and the deionization and hyper filtration filters changed only as needed as indicated by TDS tests.
Here are some basic guidelines: pre-filter and polishing filter elements should be changed annually in relatively rare instances of source water with unusually high levels of sediment or debris such as areas surrounded by heavy construction. The pre filter element may need to be changed more frequently due to premature plugging of the filter.
The ionization filters typically last anywhere from four months to three years depending on the volume of usage and the quality of the local water supply. Both the ionization filters should be changed whenever the system mounted TDS meter in the "out" position displays a number equal to or greater than four parts per million. It's important never to fill an autoclave with water with greater than five parts per million TDS.
VistaPure's hyper filtration element typically only needs to be replaced every three to five years depending on the volume of usage and the quality and pressure of the local water supply. Replace the hyper filtration element whenever the system mounted TDS meter in the "in" position exceeds 10% of the TDS of the municipal water supply feeding the system as measured with the included handheld meter checking water quality with the provided TDS meters monthly will help you keep ahead of required filter changes.
Please note that water should be running through the system when checking water quality using the system mounted TDS meter, simply run the Vista peer faucet for a few moments in the system will start to produce water and yield accurate results. Also please note that all filters are not created equal using inferior knockoff filter elements or following protocols different from those specified by the manufacturer may result in less than desirable outcomes and inhibits our ability to provide customer service and warranty support for the system.

How to Change VistaPure Filters

The Prefilter & Polishing filter should be changed at least once per year, and the Deionization and Hyperfiltration filters only need to be changed on an as-needed basis.