Stop throwing away money on wipes
Tell us about your studio and we’ll show you how much you can save.
Here is a calculator for how much you can save with OPTIM OS1 wipes
Save Money
Offices using Quats-alcohol-based wipes that switch to OPTIM OS1 can save over $2,000 per year on average.
Shorten Turn Over Time
A hospital-grade cleaner-disinfectant with 60-second kill times for the toughest viruses, bacteria, and yeast, and 45 seconds for TB.
Reduce Wipe Waste
Wipe down the same surface area that would take two competitor wipes to complete effectively.
How they tested it.
In a recent Dental Advisor study² on surface disinfectant wipes, OPTIM OS1 outperformed the other brands, including a leading quats-alcohol wipe. Not only did it remain effective for its full 1-minute contact time, but it also covered a much larger surface area than the competitor wipes.
To test the wipes, researchers used a 12.5-square-foot table divided into four sections. Each wipe was used to wipe down one quarter section. Researchers then waited for the kill time to elapse before moving to the next section with the same wipe. OPTIM OS1 was able to effectively clean and disinfect two times more surface area than the leading quats-alcohol-based wipe.
How to Use the Adjustable Tank Stands
Adjustable tank stands for installing the VistaCool at the correct height are available as accessories when needed (S7545 for use with single-unit V7501; S7547 for use with double-unit V7502). These stands raise the tank height between 1/2” and 5” in 1/2” increments.
Instructions
- Measure to determine how much additional height is required for the top of the VistaCool water tank to be above the coolant overflow fitting on the drain adapter assembly. Be sure the top of the tank is below the autoclave outlet
- Select the appropriate orientation for the adjustable tank stand. Note that because of how the openings in the stands are positioned, one orientation raises the water tank in even, one-inch increments (1”, 2”, etc.). Use the inverted orientation if you need to raise the tank in a 1/2” increment (1/2”, 1-1/2”, 2-1/2”, etc.)
- Insert the included metal “straps” into the appropriate openings to achieve the correct height. Be sure that the tank sets level and securely in the tank stand.
