Anodization

STATIM 2000 Maintenance Kit

SKU 01-115325S
$195
In stock
1
Product Details

We are pleased to announce the introduction of a new Maintenance Kit for your STATIM 2000 G4 and 5000 G4 autoclave, which will allow for easier ordering of parts required for regular maintenance.

Each kit contains the following three components that are required to be replaced every 6 months (or 500 cycles) in order to maintain optimal performance of your STATIM:

  • Cassette seal and lubricant (also sold separately as part number 01-100028S for STATIM 2000
  • Biological filter (also sold separately as part number 01-102119S, compatible with both STATIM 2000 and STATIM 5000)
  • Air compressor filter (also sold separately as part number 01-100207S for STATIM 2000

NOTE: SciCan Green, with the STATIM name embossed on the seal, to make them easy to tell apart from the imitations!
Read More

Seals should be changed every 500-800 cycles or every six months (whichever is first).

Air filters should be changed every 500 cycles or every six months (whichever is first)

STATIM Air filters  Air filters should be changed every 500 cycles or every six months (whichever is first)

  • Includes detailed instructions and high purity mineral oil for seal lubricant.
  • (SDS download with purchase)

Every 6 months

Cassette Seal • Replace every 500 cycles or six months (whichever is first), or whenever necessary. Video: How to change the cassette seal
Biological and/or Air Filter • Replace every 500 cycles or six months
Save this product for later

The Anodizer your studio needs!

  • Support and membership to our private forum full of information videos, photos, expert user advice and inspiration is included!
  • Includes Anodizing is Awesome, a LIVE online one-on-one instructional course all about anodizing body jewelry. Approximately one hour by video chat or telephone.
  • The power to create scintillating colors, run larger baths and precise control.
  • It is the right power supply for both one of a kind and production anodizing of body jewelry.
  • Accurate voltage and amperage meters — 0 to 120 Volts.
  • Extremely fine controls for more color options, and more precision.
  • Anodizing titanium parts such as jewelry before sterilization and wear renders the surface smoother and passive.
  • The anodization process removes microscopic particulate matter that would otherwise be missed by acid or alkaline cleaning, solvents, steam and ultrasonic methods. [Reference — ASTM F-86 standard method for surface finish and passivation]
  • This anodizer include two sets of color coded leads, one pair of rubber gloves, one stainless steel cathode and full instructions.
  • In addition, Brian Skellie‘s body art specific instruction, tips and tricks gathered over two decades of experience to color and passivate titanium and niobium body jewelry with safe and artistic effects.

Attend a presentation or contact us for more information Anodizing is Awesome header

In Europe?

Order 220-240V units from us at piercers.com

1 thought on “Anodization”

Comments are closed.