+3

Repair Labor

REPAIR

$400

In stock

Quantity:

1

Add to Bag

Product Details

Brand: SciCan

We will repair your STATIM or other SciCan equipment

For your SciCan product repair we will need the following details: your serial number which should be on the back of the unit, and a description of the issues noted such as cycle fault numbers, sounds or visible damage.

With this information we will provide you with a return authorization number and the best shipping address for where to send the equipment.

*The minimum estimate fee is $150 in case the estimate is refused and equipment is to be returned unrepaired or destroyed/recycled.

---

Shipping the Statim Unit

You must write your RMA number clearly on the outside of the package

Before you move the unit, you will need to drain the reservoir. To do so, follow these steps:

1. Place a water container below the unit.
2. Using the drain tube (see Section 3.5 Priming the Statim Pump, Figure 6 in the manual) empty the contents of the reservoir into the water container.
3. Remove any remaining water from the reservoir with a non-linting, absorbent towel.
4. Screw-in the three leveler feet found underneath the unit.
5. Repack the unit in the original packing materials and include all accessories originally included with the unit.
6. Specify heated and insured shipping.

Make sure to include ALL cassettes used with this unit. The cassettes must be shipped with the unit for calibration.

Note: Do not ship the unit with a cassette inserted.

Save this product for later

Favorite

• Search Products
• My Account
• Track Orders
• Favorites
• Shopping Bag

Display prices in: USD

The Anodizer your studio needs!

• Support and membership to our private forum full of information videos, photos, expert user advice and inspiration is included!
• Includes Anodizing is Awesome, a LIVE online one-on-one instructional course all about anodizing body jewelry. Approximately one hour by video chat or telephone.
• The power to create scintillating colors, run larger baths and precise control.
• It is the right power supply for both one of a kind and production anodizing of body jewelry.
• Accurate voltage and amperage meters — 0 to 120 Volts.
• Extremely fine controls for more color options, and more precision.
• Anodizing titanium parts such as jewelry before sterilization and wear renders the surface smoother and passive.
• The anodization process removes microscopic particulate matter that would otherwise be missed by acid or alkaline cleaning, solvents, steam and ultrasonic methods. [Reference — ASTM F-86 standard method for surface finish and passivation]
• This anodizer include two sets of color coded leads, one pair of rubber gloves, one stainless steel cathode and full instructions.
• In addition, Brian Skellie‘s body art specific instruction, tips and tricks gathered over two decades of experience to color and passivate titanium and niobium body jewelry with safe and artistic effects.

Attend a presentation or contact us for more information

In Europe?

Order 220-240V units from us at piercers.com