Statim 2000 USED / REFURBISHED
STATIM 2000 Cassette Autoclave
Reconditioned used units validated and spore tested with one year warranty
- Ultra-fast 6 minute unwrapped cycle
- 14 minute wrapped cycle
- Exceptional instrument turnover
- 10 minute Dri-Tecc Drying Technology
- Aseptic transfer of instrument directly to the point-of-use
- Reduced instrument investment
- Prolongs instrument life
The STATIM 2000 Classic boasts a 6-minute cycle, but has the added advantage of employing a fully removable chamber so you can aseptically transport a set of freshly sterilized instruments directly to the procedure area.
The STATIM 2000 is fully automatic. Simply select one of the three sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
SciCan's STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.
The STATIM 2000 is a reliable cassette sterilizer that's compact enough to fit in procedure areas and fast enough to sterilize jewelry, expensive Lasik, PRK, endoscopic and cataract instruments, including phaco handpieces, between procedures - it can complete an unwrapped sterilization cycle in just six minutes and a wrapped cycle in 14 minutes.
Dri-TecC – Convection heat drying technology
The STATIM 2000 uses convection heat to dry instruments by utilizing the remaining heat in the system after the sterilization phase. Heat is captured and released into the cassette, drying wrapped instrument loads in as little as 10 minutes.
| Cycle | Unwrapped | Wrapped | Rubber/Plastic |
|---|---|---|---|
| Sterilization time | 3.5 minutes | 10 minutes | 15 minutes |
| Sterilization temp. | 135º C | 135º C | 121º C |
| Total cycle time | 6 minutes | 14 minutes | 20 minutes |
ACCESSORIES available in the Shop:
01-100008A Cassette complete (with rack 01-106653)
01-100028S Seal & lubricant kit
01-100207S Air compressor filter
01-102119S Microbiological air filter
01-100812S Waste bottle complete
01-100204S Exhaust tube
01-103945S Instrument rack for unwrapped instruments
01-106653 Instrument rack for wrapped instruments
SCI134 Test Strip indicators (box of 250)
01-101783S Water reservoir cap & filter
01-109300S Water reservoir filter
SPECIFICATIONS:
| Unit Size : | L 480mm x W 415mm x H 150mm L 19" x W 16.25" x H 6" |
| Cassette Internal Dimensions : | L 280mm x W 180mm x H 35mm L 11" x W 7" x H 1.5" |
| Reservoir Capacity : | 4.0 litres (distilled water) Approximately 40 cycles |
| Weight without water : | 21 kg/46 lbs |
| Power Consumption : | 110-120 V, 60Hz, 1300 W |
When you receive your Statim 2000 packing carton, the items listed below will be included.
If any of the items are missing, contact us immediately so that the situation can be corrected.
- Cassette Tray and Lid
- Unwrapped Instrument Rack
- Waste Bottle
- Bottle Lid Fitting
- Power Cord
- Operator's Manual
- Exhaust Tube
- Tube Mounting Hardware
Finance your equipment at our checkout
*The use of STATIM sterilizers was introduced to the body art field in the early 1990's by Brian Skellie at Piercing Experience, and developed in community along with other practical innovations in applied safety precautions and techniques.
The Anodizer your studio needs!
- Support and membership to our private forum full of information videos, photos, expert user advice and inspiration is included!
- Includes Anodizing is Awesome, a LIVE online one-on-one instructional course all about anodizing body jewelry. Approximately one hour by video chat or telephone.
- The power to create scintillating colors, run larger baths and precise control.
- It is the right power supply for both one of a kind and production anodizing of body jewelry.
- Accurate voltage and amperage meters — 0 to 120 Volts.
- Extremely fine controls for more color options, and more precision.
- Anodizing titanium parts such as jewelry before sterilization and wear renders the surface smoother and passive.
- The anodization process removes microscopic particulate matter that would otherwise be missed by acid or alkaline cleaning, solvents, steam and ultrasonic methods. [Reference — ASTM F-86 standard method for surface finish and passivation]
- This anodizer include two sets of color coded leads, one pair of rubber gloves, one stainless steel cathode and full instructions.
- In addition, Brian Skellie‘s body art specific instruction, tips and tricks gathered over two decades of experience to color and passivate titanium and niobium body jewelry with safe and artistic effects.
Attend a presentation or contact us for more information 
1 thought on “Anodization”
Comments are closed.